Kia Soul: Removal
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
| 2. |
Disconnect the ignition lock switch connector (A).
|
| 3. |
Remove the ignition lock and clutch switch (B).
|
Inspection
Signal Circuit Inspection
1.
Check ignition lock switch pull-up voltage
(1)
IG KEY "OFF", ENGINE "OFF".
...
Installation
1.
Install in the reverse order of removal.
(1)
Tighten the nut with the specified torque.
Tightening ...
See also:
26 Brake Control Solenoid Valve(26/B_VFS). Circuit Diagram
...
Front Washer Motor Installation
1.
Reassemble the washer reservoir.
Tightening torque:
6.9 ~ 10.8Nm (0.7 ~ 1.1, kgf.m, 5.0 ~ 7.9 lb-ft)
...
Panorama Sunroof Motor Inspection
1.
Close the panorama sunroof glass and blind completely (Full
close position).
2.
Disconnect the negative (-) battery ter ...