Kia Soul: Installation - maincat - Clutch SystemKia Soul: Installation

Kia Soul 2014-2019 PS Service Manual / Clutch System / maincat / Installation

1.
Install in the reverse order of removal.
(1)
Tighten the nut with the specified torque.
Tightening torque:
2.0 ~ 4.0 N.m (0.2 ~ 0.4 kgf.m, 1.4 ~ 2.9 lb-ft)
  
After pressing the clutch pedal operation stroke to the position (D), turn the ignition lock switch lever to ON->OFF position (E) and then tighten the bolts (B) with specified torque.
Clutch pedal operation stroke (D)
Gasoline 1.6: 145 ± 3 mm(5.7087 ± 0.1181 in.)
Gasoline 2.0: 150 ± 3 mm(5.9055 ± 0.1181 in.)
Ignition lock switch ON->OFF position (E)
Gasoline 1.6: 72.5 ± 3 mm(2.8543 ± 0.1181 in.)
Gasoline 2.0: 75.0 ± 3 mm(2.9528 ± 0.1181 in.)

    Removal
    1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the ignition lock switch connector (A). ...

    Clutch Switch
    ...

    See also:

    Hands Free Switch Inspection
    1. Check for resistance between terminals in each switch position. [Voice + Bluetooth] [Voice + Bluetooth] Switch ...

    Inspection
    1. Uplift the vehicle with lift. 2. Remove the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover") ...

    Hood Assembly Replacement
       • Be careful not to damage the hood and body. ...