•
|
Be careful not to damage the hood and body.
|
|
•
|
When removing and installing the hood, an assistant is
necessary.
|
•
|
When removing the clips, use a clip remover.
|
|
1. |
Using a screwdriver, lift the socket clips (A) up slightly on
both ends of the lifter (B).
|
2. |
After loosening the hood hinge (B) mounting bolts, remove the
hood assembly (A).
Tightening torque :
21.6~26.5 N.m (2.2~2.7 kgf.m, 15.9~19.5 lb-ft)
|
|
3. |
Install in the reverse order of removal.
• |
Make sure the hood locks/unlocks and opens/closes
properly.
|
• |
Adjust the hood alignment.
|
|
|
•
When removing and installing the hood lifter, an assistant
is necessary.
...
See also:
Side Airbag (SAB) Module. Installation
Be sure to install the harness wires not to be pinched or interfered
with other parts.
...
Rear Transverse Trim Replacement
•
Put on gloves to protect your hands.
...
Opening the hood
1.Pull the release lever to unlatch the hood. The hood should pop open slightly.
Open the hood after turning off the engine on a flat surface, shifting the shift
lever to the P(Park) position for ...