Kia Soul: Fuel Pressure Regulator. Repair procedures
Removal
1. | Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") |
2. | Disconnect the electric pump wiring connector (A) and the fuel sender connector (B). |
3. | Remove the head assembly (A) after releasing the cushion fixing clip (B). |
4. | Disconnect the fuel tube connector (A). |
5. | Remove the reservior-cup (B) after releasing the fixing hooks (A). |
6. | Disconnect the fuel tube quick-connector (A). |
7. | Release the fixing hooks, and then remove the pre-filter (B). |
8. |
Remove the fuel pressure regulator (A).
|
Installation
1. | Install in the reverse order of removal. |
Fuel Sender. Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") ...Fuel Line. Repair procedures
Removal ...See also:
Accelerator Position Sensor (APS). Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the ...
TPMS Sensor. Diagnosis procedure by using diagnostic device
As manual for diagnosis methods by using diagnosis device, the main contents
are as follows:
1.
Connect self-diagnosis connector(16pins) located in the lower
of driv ...
Brake Pedal. Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the crash pad lower panel.
(Refer to Body - & ...