Kia Soul: Brake Pedal. Removal
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
| 2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
|
| 3. |
Disconnect the stop lamp switch connector (A).
|
| 4. |
Remove the stop lamp switch.
(Refer to Brake System - "Stop lamp switch")
|
| 5. |
Remove the brake pedal member mounting bolt (A).
|
| 6. |
Remove the snap pin (A) and clevis pin (B).
|
| 7. |
Remove the brake pedal member assembly mounting nuts and then
remove the brake pedal assembly.
|
Brake Pedal. Components
1. Cowl bracket
2. Brake pedal member assembly
3. Stop lamp switch
4. Return spring
5. Bolt
6. Brake pedal arm
7. Brake pedal pad
...
Brake Pedal. Inspection
1.
Check the bushing for wear.
2.
Check the brake pedal for bending or twisting.
3.
Check the brake pedal retur ...
See also:
Tilt and telescopic steering
Tilt and telescopic steering allows you to adjust the steering wheel before you
drive.You can also raise it to give your legs more room when you exit and enter
the vehicle.
The steering wheel sho ...
Thermostat Removal
Disassembly of the thermostat would have an adverse effect, causing
a lowering of cooling efficiency.
...
Brake Booster. Installation
1.
Install in the reverse order of removal.
A.
...