Kia Soul: Blower Resistor (Manual) Inspection
Kia Soul 2014-2019 PS Service Manual / Heating,Ventilation And Air Conditioning / Blower / Blower Resistor (Manual) Inspection
| 1. |
Measure the resistance between the terminals.
|
| 2. |
The measured resistance is not within specification, the blower
resistor must be replaced. (After removing the resistor)
|
Blower Motor Replacement
[Standard Type]
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash P ...
Blower Resistor (Manual) Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
...
See also:
Power Window Motor Inspection
Front Power Window Motor
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim.
(Refer ...
Seat Heater Switch Installation
First Row Seat
1.
Install the heater & A/C control unit.
(Refer to Heating, Ventilation And Air Conditioning - "Heater
& A/C Control Uni ...
ETC (Electronic Throttle Control) System. Repair procedures
Inspection
Throttle Position Sensor (TPS)
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output v ...