Kia Soul: Blower Resistor (Manual) Replacement
Kia Soul 2014-2019 PS Service Manual / Heating,Ventilation And Air Conditioning / Blower / Blower Resistor (Manual) Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
|
| 3. |
Disconnect the connector (A) and then remove the blower resistor
(B) after loosening the mounting screws.
|
| 4. |
Install in the reverse order of removal.
|
Blower Resistor (Manual) Inspection
1.
Measure the resistance between the terminals.
2.
The measured resistance is not within specification, the blower
resistor must be replac ...
Field Effect Transistor (FATC) Inspection
1.
Turn the ignition switch ON.
2.
Manually operate the control switch and measure the voltage of
the blower motor.
3. ...
See also:
Starting the engine
1.Carry the smart key or leave it inside the vehicle.
2.Make sure the parking brake is firmly applied.
3.Place the transaxle shift lever in P (Park). Depress the brake pedal fully.
You can also sta ...
Antenna
Your vehicle uses a roof antenna to receive AM or/and FM broadcast signals.
This antenna is removable. To remove the roof antenna, turn it counterclockwise.
To install the roof antenna, turn it c ...
Panorama Sunroof Assembly Removal
•
In order to remove the panorama sunroof assembly, use
the tools shown in the followi ...