•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
•
|
Take care not to bend or scratch the trim and panels.
|
|
1. |
Loosen the mounting screws, then remove the sunvisor (A) and retainer
(B).
|
2. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
1. Sunvisor
2. Retainer
...
See also:
Components
1. Telematics unit (TMU)
2. Roof Antenna (GPS)
3. AUX jack
4. Audio head unit
5. Mic
...
Cool box (if equipped)
You can keep beverage cans or other items cool in the glove box.
1. Turn on the air conditioning.
2. Slide the open/close lever of the vent installed in the glove box to the open
position.
3. ...
Side Impact Sensor (SIS). Description
Side Impact Sensor (SIS) system consists of two P-SIS which are installed
at each center of the front door module (LH and RH) and two SIS which are installed
at each center pillar nearby (LH ...