Kia Soul: Side Impact Sensor (SIS). Description
Side Impact Sensor (SIS) system consists of two P-SIS which are installed
at each center of the front door module (LH and RH) and two SIS which are installed
at each center pillar nearby (LH and RH).
Side Pressure Sensor is also called P-SIS because it detects pressure
due to collision at its mounting location.
Side Impact Sensor is also called A-SIS because it detects acceleration.
SRSCM decides deployment of the airbag and the time of deployment through
the collision signal of the SIS when the collision occurred.
Front Impact Sensor (FIS). Installation
•
Do not turn the ignition switch ON and do not connect
the battery cable while replac ...
See also:
Rear Shock Absorber Replacement
1.
Loosen the wheel nuts slightly. Raise the vehicle, and make sure
it is securely supported.
2.
Remove the front wheel and tire (A) from f ...
Front Seat Frame Assembly Replacement
•
Put on gloves to protect your hands.
...
Engine Room Under Cover Removal and Installation
Engine Room Under Cover
1.
Remove the engine room under cover (A).
Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft ...