Kia Soul: Engine Room Under Cover Removal and Installation - Engine And Transmission Assembly - Engine Mechanical SystemKia Soul: Engine Room Under Cover Removal and Installation

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Engine And Transmission Assembly / Engine Room Under Cover Removal and Installation

Engine Room Under Cover
1.
Remove the engine room under cover (A).

Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

2.
Install in the reverse order of removal.
Engine Room Side Cover
1.
Remove the engine room side covers (A).

Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

[RH]

[LH]

2.
Install in the reverse order of removal.
    Engine Room Under Cover Components
    1. Engine room side cover (RH) 2. Engine room side cover (LH) 3. Engine room under cover ...

    Engine Mounting Components
    1. Transaxle mounting bracket 2. Roll road bracket 3. Engine mounting bracket 4. Engine mounting support bracket ...

    See also:

    Center Fascia Panel Component Location
    1. Center fascia panel ...

    ESC Control Module. Removal
    1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the ECM. (Refer to Engine Control / Fuel Syst ...

    Fuel gauge
    The fuel gauge indicates the approximate amount of fuel remaining in the fuel tank. The fuel tank capacity is given in section 8. The fuel gauge is supplemented by a low fuel warning light, whic ...