Kia Soul: Starter Disassembly
1. |
Disconnect the M-terminal (A) on the magnet switchassembly.
|
2. |
After loosening the 2 screws (A), detach the magnet switch assembly
(B).
|
3. |
Loosen the brush holder mounting screws (A) and the trough bolts
(B).
|
4. |
Remove the rear bracket assembly (A) and brush holder assembly
(B).
|
5. |
Remove the yoke assembly (A).
|
6. |
Remove the packing (A), lever plate (B), lever (C), armature assembly
(D).
|
7. |
Press the stopper (A) using a socket (B).
|
8. |
After removing the stop ring (A) using stopper pliers (B).
|
9. |
Remove the stop ring (B), stopper (A), overrunningclutch (C) and
armature (D).
|
Starter Installation
1. Install in the reverse order of removal. Starter mounting bolt: 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft) ...Starter Reassembly
1. Reassemble in the reverse order of disassembly. ...See also:
Evaporator Temperature Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove it console side cover (A) by pushing it rearward.
[RH]
...
Cooling Fan Disassembly
1.
Remove the cooling fan (A) from the cooling fan assembly.
2.
Disconnect the fan motor connector (A) from the resistor.
...
Inspection
W/Harness Inspection
1.
Check the vehicle speed sensor by using the scan tool.
(if normal, current vehicle speed is display)
2.
Chec ...