Kia Soul: Cooling Fan Disassembly - Cooling System - Engine Mechanical SystemKia Soul: Cooling Fan Disassembly

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Disassembly

1.
Remove the cooling fan (A) from the cooling fan assembly.

2.
Disconnect the fan motor connector (A) from the resistor.

3.
Remove the fan motor (A) from the cooling fan shroud.
Tightening torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

4.
Assemble in the reverse order of disassembly.
    Cooling Fan Removal and Installation
    Cooling fan assembly 1. Disconnect the battery negative terminal. 2. Remove the air duct (A). 3. Se ...

    Cooling Fan Inspection
    Fan Motor 1. Disconnect the fan motor connector from the resistor. 2. Connect the battery voltage to the "+" terminal and ...

    See also:

    Front Hub / Knuckle Installation
    1. Install in the reverse order of removal.    Use a SST (09581-11000) when ...

    Scan
    While song (file) is playing   key Shortly pressing the key : Scans all songs from the next song for 10 seconds each. ❈ Press the  key again to turn off. ❈ The SCAN ...

    Shift Lever Installation
    1. Install in the reverse order of removal.    When installing, set room sid ...