Kia Soul: Removal
1. |
Remove the air cleaner assembly.
G 1.6 GDI (Refer to Engine Mechanical System - "Air Cleaner")
G 2.0 GDI (Refer to Engine Mechanical System - "Air Cleaner")
|
2. |
Remove the battery & tray.
G 1.6 GDI (Refer to Engine Electrical System - "Battery")
G 2.0 GDI (Refer to Engine Electrical System - "Battery")
|
3. |
Disconnect the clutch tube (B) and reservoir hose (A) from the
clutch master cylinder.
|
4. |
Loosen the clutch tube bracket bolts (A).
|
5. |
Remove the clutch tube (A) after removing the release cylinder
assembly (B).
|
Components
1. Clutch pedal assembly 2. Ignition lock and clutch switch 3. Master cylinder 4. Clutch tube ...Installation
When installing, O-rings of clutch tube should be replaced with a new one. 1. Install i ...See also:
Windshield Wiper-Washer Switch
Inspection
Check for continuity between the terminals while operating the wiper
and washer switch. If it is not normal condition, replace wiper and wiper
switch.
Wiper Switch
...
Trip interruption
Trip interruption expense benefits are provided in the event that a warranty-related
disablement occurs more than 150 miles from your home, and the repairs require more
than 24 hours to complete. ...
Rear Torsion Beam Axle Replacement
1.
Loosen the wheel nuts slightly. Raise the vehicle, and make sure
it is securely supported.
2.
Remove the front wheel and tire (A) from f ...