Kia Soul: Removal
1. |
Remove the clutch pedal mounting nuts (A).
|
2. |
Separate the push rod (C) after remove the pin (A) and washer
(B).
|
3. |
Remove the air cleaner assembly.
G 1.6 GDI (Refer to Engine Mechanical System - "Air Cleaner")
G 2.0 GDI (Refer to Engine Mechanical System - "Air Cleaner")
|
4. |
Remove the battery and battery tray.
G 1.6 GDI (Refer to Engine Electrical System - "Battery")
G 2.0 GDI (Refer to Engine Electrical System - "Battery")
|
5. |
Disconnect the clutch tube (B) and reservoir hose (A) from the
clutch master cylinder.
|
Components
1. Clutch pedal assembly 2. Ignition lock and clutch switch 3. Master cylinder 4. Clutch tube ...Installation
1. Install in the reverse order of removal. 2. After be equipped, perform bleeding air procedure in clutch release cylinder after pouring t ...See also:
Components
1. Control shaft complete
2. Back-up lamp switch
3. Control cable bracket
4. Speed sensor
5. Transaxle case
...
Troubleshooting
Basic Troubleshooting
Basic Troubleshooting Guide
Customer Problem Analysis Sheet
Basic Inspection Procedure
Measuring Condition of Electronic Parts' Resistance
The mea ...
Driver Airbag (DAB) Module and Clock Spring. Removal
1.
Set the front tires straight-ahead before removing the steering
wheel.
...