Kia Soul: Rear Washer Switch Inspection
1. |
Check for continuity between the terminals while operating
the wiper and washer switch. If it is not normal condition, replace
wiper and wiper switch.
Rear Wiper Switch
Rear Washer Switch
|
Rear Wiper Motor Installation
1. Install the rear wiper motor assembly. Tightening torque Bolt : 6.9~10.8 Nm (0.7~1.1 kgf.m, 5.1~8.0 lbf.ft) ...Rear Washer Motor Inspection
1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water. ...See also:
Mood Lamp Removal
[Mood Lamp Unit]
1.
Disconnect the negative (-) battery terminal.
2.
Remove the audio head unit.
(Refer to Body ...
Engine Coolant Temperature Sensor (ECTS). Description and Operation
Description
Engine Coolant Temperature Sensor (ECTS) is located in the engine coolant
passage of the cylinder head for detecting the engine coolant temperature. The
ECTS uses a thermistor th ...
CVVT Oil Control Valve (OCV). Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OCV connector.
3.
Measure resistance between the ...