Kia Soul: Intake Manifold Removal and Installation
Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Intake And Exhaust System / Intake Manifold Removal and Installation
1. |
Remove the engine cover.
|
2. |
Disconnect the battery negative terminal.
|
3. |
Remove the air cleaner assembly.
(Refer to Intake And Exhaust System-"Air Cleaner")
|
4. |
Disconnect the injector extension connector (A), the VIS (Variable
intake system) connector (B) and the PCSV (Purge control solenoid valve)
connector (C).
|
5. |
Disconnect the ETC (Electronic throttle control) connector (A)
and the MAPS (Manifold absolute pressure sensor) connector (B).
(Refer to Engine Control / Fuel System - "ETC(Electronic Threttle
Control) System")
|
6. |
Disconnect the knock sensor connector (A).
|
7. |
Disconnect the PCV (Positive crankcase ventilation) hose (A) and
the PCSV (Purge control solenoid valve) hose (B).
|
8. |
Disconnect the vacuum hose (A) and the water hoses (B).
|
9. |
Remove the intake manifold (A) with the gasket.
|
10. |
Install in the reverse order of removal.
|
Intake Manifold Components
1. Intake manifold assembly 2. Intake manifold gasket 3. Electronic throttle body gasket 4. Electronic throttle body 5. Bracket ...Exhaust Manifold Components
1. Heat protector 2. Exhaust manifold 3. Gasket 4. Exhaust manifold stay ...See also:
Rear Glass Installation
•
In order to mount the rear glass, use the tools shown
in the following figure:
...
Vehicle break-in process
No special break-in period is needed. By following a few simple precautions for
the first 600 miles (1,000 km) you may add to the performance, economy and life
of your vehicle.
Do not race the ...
Blower Resistor (Manual) Inspection
1.
Measure the resistance between the terminals.
2.
The measured resistance is not within specification, the blower
resistor must be replac ...