Kia Soul: High beam operation
To turn on the high beam headlights, push the lever away from you. Pull it back for low beams.
The high beam indicator will light when the headlight high beams are switched on.
To prevent the battery from being discharged, do not leave the lights on for a prolonged time while the engine is not running.
To flash the headlights, pull the lever towards you. It will return to the normal (low beam) position when released. The headlight switch does not need to be on to use this flashing feature.
WARNING - High beams
Do not use high beam when there are other vehicles. Using high beam could obstruct the other driver's vision.
Lighting control
The light switch has a Headlight and a Parking light position.
To operate the lights, turn the knob at the end of the control lever to one of
the following positions:
(1) OFF position
(2) Par ...
Turn signals and lane change signals
The ignition switch must be on for the turn signals to function. To turn on the
turn signals, move the lever up or down (A). The green arrow indicators on the instrument
panel indicate which t ...
See also:
Intake Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the intake actuato ...
Rear Bumper Beam Assembly Replacement
•
Put on gloves to protect your hands.
...
Changing the engine oil and filter
Have engine oil and filter changed by an authorized Kia dealer according to the
Maintenance Schedule at the beginning of this section.
WARNING - California proposition 65
Engine oil contains chemi ...