Kia Soul: Intake Actuator Inspection
Kia Soul 2014-2019 PS Service Manual / Heating,Ventilation And Air Conditioning / Blower / Intake Actuator Inspection
| 1. |
Turn the ignition switch OFF.
|
| 2. |
Disconnect the intake actuator connector.
|
| 3. |
Verify that the intake actuator operates to the fresh air position
when connecting 12V to terminal 3 and grounding terminal 7.
Verify that the intake actuator operates to the recirculated air
position when connected in reverse.
|
| 4. |
Connect the intake actuator connector.
|
| 5. |
Turn the ignition switch ON.
|
| 6. |
Check the voltage between terminal 5 and 6.
Specification
It will feedback the current position of the actuator to controls.
|
| 7. |
If the intake actuator does not operate well, substitute with
a known-good intake actuator and check for proper operation.
|
| 8. |
Replace the intake actuator if it is proved that there is a problem
with it.
|
Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake
door by a signal from the control unit. Pressing the intake selection switch
will shift between recirculation and fr ...
Intake Actuator Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
...
See also:
Driver's and passenger's front air bag
Your vehicle is equipped with an Advanced Supplemental Restraint (Air Bag) System
and lap/shoulder belts at both the driver and passenger seating position.
The indication of the system's pr ...
Valve Body. Description
The valve body is essential to automatic transaxle control and consists
of various valves used to control the oil feed from the oil pump. Specifically,
these valves consist of pressure regula ...
Component Location
1. Driver power window main switch
2. BCM (Body Control Module)
3. Door lock switch
4. Front door lock actuator & switch
5. Rear door lock actuator & ...