Kia Soul: Crankshaft Position Sensor (CKPS). Repair procedures
Kia Soul 2014-2019 PS Service Manual / Engine Control / Fuel System / Engine Control System / Crankshaft Position Sensor (CKPS). Repair procedures
Inspection
1. |
Check signal waveform of CKPS and CMPS using a GDS.
|
Removal
1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Remove the engine room under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
|
3. |
Disconnect the crankshaft position sensor connector (A) and remove
the sensor (B) after removing the installation bolt.
|
Installation
|
|
|
1. |
Install in the reverse order of removal.
|
Crankshaft Position Sensor (CKPS). Schematic Diagrams
Circuit Diagram (M/T) (A/T) ...Camshaft Position Sensor (CMPS). Description and Operation
Description Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element. It is related with Crankshaft Position Sensor (CKPS) and detects the ...See also:
Heated Oxygen Sensor (HO2S). Troubleshooting
Signal Waveform
...
SCAN
Press the
key
Briefly pressing the key (under 0.8 seconds): The broadcast frequency increases
and previews each broadcast for 5 seconds each. After scanning all frequencies,
returns and ...
Recommended lubricants and capacities
To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality.
The correct lubricants also help promote engine efficiency that results in improve ...