Kia Soul: Camshaft Position Sensor (CMPS). Description and Operation
Kia Soul 2014-2019 PS Service Manual / Engine Control / Fuel System / Engine Control System / Camshaft Position Sensor (CMPS). Description and Operation
Description
Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft
position by using a hall element.
It is related with Crankshaft Position Sensor (CKPS) and detects the piston
position of each cylinder which the CKPS can't detect.
The CMPS is installed on engine head cover and uses a target wheel installed
on the camshaft. The Cam Position sensor is a hall-effect type sensor. As the
target wheel passes the Hall sensor, the magnetic field changes in the sensor.
The sensor then switches a signal which creates a square wave.
Crankshaft Position Sensor (CKPS). Repair procedures
Inspection 1. Check signal waveform of CKPS and CMPS using a GDS. Specification: Refer to “Waveform” Removal ...Camshaft Position Sensor (CMPS). Troubleshooting
Wave Form ...See also:
Troubleshooting Guide
Troubleshooting (Step type)
Symptom
Suspected area
Repairment
Pressing power switch does not turn on system
Radio receiver ...
Troubleshooting
Trouble Symptom
Probable cause
Remedy
Vehicle pulls to one side
Scoring of driveshaft ball joint
Replace
Wear, rattle or scoring of wheel b ...
External Amplifier Removal
1.
Disconnect the negative (-) battery terminal.
2.
Loosen loosening the mounting nuts.
3.
Remove the a ...