Kia Soul: Brake Switch. Removal
| 1. |
Disconnect the brake switch connector (A).
|
| 2. |
Pull the locking plate (A) as indicated by the arrow.
|
| 3. |
Turn brake switch 45В° counterclockwise and remove it.
|
Brake Pedal. Installation
1.
Pre-tighten the bracket fixing bolt (A) in dash panel.
2.
Install the brake booster and brake pedal member fixing nuts (A)
secur ...
Brake Switch. Inspection
1.
Check the stop lamp switch.
(1)
Connect a circuit tester to the connector of stop lamp
switch, and check whether or not there is ...
See also:
Circuit Diagram
...
Brake Pedal. Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the crash pad lower panel.
(Refer to Body - & ...
Operation
Evaporative System Monitoring
Evaporative And ORVR Emission Control System
This system consists of a fill vent valve, fuel shut-off valve, fuel cut
valve (for roll over), two way val ...