Kia Soul: AVN Head Unit Removal - AVN System - Body Electrical SystemKia Soul: AVN Head Unit Removal

Kia Soul 2014-2019 PS Service Manual / Body Electrical System / AVN System / AVN Head Unit Removal

  
Put on gloves to protect your hands.
  
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Disconnect the negative (-) battery terminal.
2.
Remove the center fascia panel (A) from the crash pad.
3.
Disconnect the connecters (A) from the center fascia panel.
4.
Remove the AVN head unit (A) after loosening the mounting screws.
5.
Disconnect the connectors (A) from the AVN heat unit.
    AVN Head Unit Components
    AVN (A/V & Navigation) Head Unit Connector Connector Pin Information No. Connector A Connector B Connector C ...

    AVN Head Unit Installation
    1. Connect the AVN head unit connectors. 2. Install the AVN head unit. 3. Install the ...

    See also:

    Rear Wiper Motor Inspection
    Rear Wiper Motor 1. Remove the connector from the rear wiper motor. 2. Connect battery positive (+) and negative (-) cable ...

    Dynamic Damper Components
    1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly ...

    Components
    1. Main crash pad assembly 2. Crash pad side cover [LH] 3. Crash pad side cover [RH] 4. Crash pad lower panel 5. Knee bolster panel 6. Steering column shroud lower panel ...