Kia Soul: Rear Wiper Motor Inspection - Rear Wiper/Washer - Body Electrical SystemKia Soul: Rear Wiper Motor Inspection

Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Rear Wiper/Washer / Rear Wiper Motor Inspection

Rear Wiper Motor
1.
Remove the connector from the rear wiper motor.
2.
Connect battery positive (+) and negative (-) cables to terminals 2 and 1 respectively.
3.
Check that the motor operates normally. Replace the motor if it operates abnormally.
No.
Description
1
Battery (+)
2
Parking
3
Ground
4
Signal

Automatic Stop Operation Check
1.
Operate the motor at low speed using the stalk control.
2.
Stop the motor operation anywhere except at the off position by disconnecting terminal 2.
3.
Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1.
4.
Check that the motor stops running at the off position.

    Component Location
    1. Head cap 2. Rear wiper arm nut 3. Rear wiper arm & blade 4. Grommet 5. Rear wiper motor assembly 6. Rear wiper motor bolt ...

    Rear Wiper Motor Removal
    1. Detach the rear wiper cap (A). 2. Remove the rear wiper arm & blade (B) after removing rear wiper HEX nut ...

    See also:

    ESC Control Module. Components
    1. Front - left tube 2. Rear - right tube 3. Rear - left tube 4. Front - right tube 5. MC2 6. MC1 7. ESC control module(HECU) 8. Bracket ...

    Temperature control
    The temperature will increase to the maximum (HI) by pushing the button (). The temperature will decrease to the minimum (Lo) by pushing the button (). When turning the knob, the temperature will ...

    Specifications
    Front Suspension Item Specification Suspension type MacPherson Strut Shock absorber Type Gas Gamma 1.6 GDI M/T ...