Kia Soul: Water Jacket Seperator Remove and Installation - Cylinder Block - Engine Mechanical SystemKia Soul: Water Jacket Seperator Remove and Installation

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Cylinder Block / Water Jacket Seperator Remove and Installation

1.
Remove the cylinder head assembly.
(Refet to Cylinder Head Assembly - "Cylinder Head")
2.
Remove the water jacket seperator (A).

  
Be careful not to deform or damage it when removing.
3.
Install in the reverse order of removal.
    Water Jacket Seperator Components
    1. Water Jacket Seperator ...

    Rear Oil Seal Components
    1. Rear oil seal ...

    See also:

    Roof Side Moulding Replacement
       • Put on gloves to protect your hands. ...

    Engine Control Module (ECM). Repair procedures
    Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the battery. (Refer to Engine Electrical Syst ...

    Wheel. Hub nut tightening sequence
    Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)    ...