Kia Soul: Transaxle Oil Temperature Sensor. Removal
Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Transaxle Oil Temperature Sensor. Removal
| 1. |
Change the shift lever to "N" range.
|
| 2. |
Remove the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
|
| 3. |
Disconnect the input & output speed sensor connector (A).
|
| 4. |
Loosen the main connctor bolt (B).
|
| 5. |
Dissconnect the solenoid valve connector (A).
|
| 6. |
Remove the solenoid valve connector clip (B) after loosening a
bolt and then remove the connector by pushing down to it.
|
Transaxle Oil Temperature Sensor. Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector (A).
3.
Measure resistance bet ...
Transaxle Oil Temperature Sensor. Installation
1.
Install in the reverse order of removal.
•
...
See also:
Spark Plug Inspection
[On vehicle inspection]
1.
Accelerate the engine to about 3,000 rpm 3 times or more.
2.
Remove the spark plug.
...
Troubleshooting
Basic Troubleshooting
Basic Troubleshooting Guide
Customer Problem Analysis Sheet
Basic Inspection Procedure
Measuring Condition of Electronic Parts' Resistance
The mea ...
Indicator Lights
Electronic Stability Control (ESC) Indicator Light
This indicator light illuminates:
Once you set the ignition switch or Engine Start/Stop Button to the ON position.
It illuminates for approxim ...