Kia Soul: TPMS Receiver Replacement
Kia Soul 2014-2019 PS Service Manual / Suspension System / Tire Pressure Monitoring System / TPMS Receiver Replacement
When the receiver first arrives for replacement:
|
It is important to make sure that the correct receiver is used
to replace the faulty part i.e. it must be Low Line and not High Line
in order to have the correct inflation warning thresholds set.
|
1. |
Disconnect vehicle battery.
|
2. |
Remove the crash pad garnish.
(Refer to BD group - "Crash Pad")
|
3. |
Remove the receiver with bracket.
|
4. |
Install in the reverse order of removal.
|
5. |
Re-connect battery and turn Ignition on.
|
6. |
After replacing the receiver, learn by using self-diagnosis device(GDS).
|
[Wheel Sensor ID Writing (Wireless) initialization]
[Wheel Sensor ID Writing (Wireless) 1]
[Wheel Sensor ID Writing (Wireless) 2]
TPMS Receiver Operation
1. General Function A. Auto-learn takes place only once per Ignition cycle. B. On successful compl ...TPMS Receiver. Diagnosis procedure by using diagnostic device
As manual for diagnosis methods by using diagnosis device, the main contents are as follows: 1. Connect self-diagnosis connector(16pins) located in the lower of driv ...See also:
Smart Key Unit Removal
Smart Key Unit
1.
Disconnect the negative (-) battery terminal.
2.
Remove the main crash pad assembly.
(Refer to ...
Intake Manifold Components
1. Intake manifold assembly
2. Intake manifold gasket
3. Electronic throttle body gasket
4. Electronic throttle body
5. Bracket
...
Fan speed control
The fan speed can be set to the desired speed by pressing the fan speed control
button.
To change the fan speed, press the button ()
for higher speed, or push the button ()
for lower speed. T ...