Kia Soul: Thermostat Installation - Cooling System - Engine Mechanical SystemKia Soul: Thermostat Installation

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Cooling System / Thermostat Installation

1.
Place the thermostat in the block.
Install the thermostat (B) with the jiggle valve upward.
2.
Install the water inlet fitting (A).

Tightening torque :
18.6 ~ 23.5N.m (1.9 ~ 2.4kgf.m, 13.7 ~ 17.4lb-ft)

3.
Fill with engine coolant.
4.
Start engine and check for leaks.
    Thermostat Inspection
    1. Immerse the thermostat in water and gradually heat the water. 2. Check the valve opening temperature. Valv ...

    Thermostat Troubleshooting
    Symptoms Possible Causes Remedy Coolant leakage • From the thermostat gasket Check the mounting ...

    See also:

    Tire pressure monitoring system
    (1) Low tire pressure telltale / TPMS malfunction indicator Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by ...

    Recommended lubricants and capacities
    To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in impro ...

    Rear Center Seat Belt Retractor Component Location
    1. Rear center seat belt retractor ...