Kia Soul: Start/Stop Button Removal
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Detach the gear boots (A).
|
3. |
Using a screwdriver or remover, remove the console upper cover
(A).
|
4. |
Disconnect the connectors (A) from the console upper cover.
|
5. |
Remove the start/stop button (A) after loosening the mounting
screws.
|
Start/Stop Button Installation
1. Install the start/stop button. 2. Install the console upper cover. 3. Connect the ...See also:
Input Speed Sensor. Specifications
▷ Type: Hall effect sensor
Operation condition (°C)°F
((-)40 ~ 150)) -40 ~ 302
Air gap(mm)in.
(1.2 ~ 1.8) 0.0472 ~ 0.0709
Output voltage(V)
...
Battery replacement
A transmitter uses a 3 volt lithium battery which will normally last for several
years. When replacement is necessary, use the following procedure.
1. Insert a slim tool into the slot and gently ...
Rear Door Belt Outside Weatherstrip Replacement
1.
Pull down rear door window glass by pressing the power window
glass switch.
2.
After loosening the mounting screws, then remove the rear ...