Kia Soul: Side Airbag (SAB) Module. Removal
The side airbag cannot be disassembled from the seat back assembly,
so replace assembly when replacing the side airbag.
|
1. |
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
|
2. |
Remove the front passenger seat assembly.
(Refer to Body - "Front seat")
|
3. |
Remove the front seat shield inner cover.
(Refer to Body - "Front seat shield inner cover")
|
4. |
Remove the front seat shield outer cover.
(Refer to Body - "Front seat shield outer cover")
|
5. |
After loosening the mounting bolts, then disconnect the front
seat back assembly (A) and front seat cushion assembly (B).
|
Side Airbag (SAB) Module. Installation
Be sure to install the harness wires not to be pinched or interfered with other parts. ...See also:
General
The supplemental restraint system (SRS) is designed to supplement the
seat belt to help reduce the risk or severity of injury to the driver and passenger
by activating and deploying the drive ...
Underdrive Brake Control Solenoid Valve(UD/B_VFS). Description
Underdrive brake control solenoid valve(UD/B) is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic pressure
inside the underdrive brake.
...
Making a call using the Steering-wheel mounted controls
(1)
button : Mode changes each time the button pressed.
(2) VOLUME button : Raises or lowers speaker volume.
(3)
/
button :
RADIO mode
- Briefly press the key: Move to next or prev ...