Kia Soul: Shift Lever. Removal - Automatic Transaxle Control System - Automatic Transaxle SystemKia Soul: Shift Lever. Removal

Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Lever. Removal

1.
Remove the shift lever knob & boots assembly (A) by Pulling in the upside.

2.
Remove the floor console assembly.
(Refer to Body - "Floor Console")
3.
Remove the rear heating joint duct (A).

4.
Disconnect the shift lever main connector.

5.
Remove the wiring (A) from the shift lever assembly.

6.
Remove the shift cable (A) from the shift lever assembly.

7.
Remove the shift lever aseembly (A) by removing the bolts.

Tightening torque :
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

    Shift Lever. Components
    1. Shift lever knob & boots aseembly 2. Shift lever assembly 3. Shift cable assembly 4. Shift cable retainer 5. Shift cable brakcet 6. Manual control lever ...

    Shift Lever. Installation
    1. Install in the reverse order of removal.    When installing, set room sid ...

    See also:

    Reducing the risk of a rollover
    This multi-purpose passenger vehicle is defined as a Crossover Utility Vehicle (CUV). CUV’s have higher ground clearance and a narrower track to make them capable of performing in a wide variety ...

    Troubleshooting
    Symptom Possible cause Remedy One lamp does not light (all exterior) Bulb burned out Replace bulb Socket, wirin ...

    Component Location
    1. Drive power window switch 2. Passenge power window switch 3. Front window motor 4. Rear window motor 5. Rear window switch ...