Kia Soul: Shift Cable. Removal - Automatic Transaxle Control System - Automatic Transaxle SystemKia Soul: Shift Cable. Removal

Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Cable. Removal

1.
Remove the floor console assembly.
(Refer to Body - "Floor Console")
2.
Remove the rear heating joint duct (A).
3.
Remove the shift cable (A) from the shift lever assembly.
4.
Remove the retainer (A) by loosening the nuts (B).
Tightening torque:
11.8 ~ 14.7 N.m (1.2 ~1.5 kgf.m, 8.7 ~ 10.8 lb-ft)

5.
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
6.
Battery and battery tray.
(Refer to Engine Electrical System - "Battery")
7.
Remove the shift cable from the transaxle.
(1)
Remove the nut (C) from the manual control lever.
Tightening torque:
9.8 ~ 13.7 N.m (1.0 ~1.4 kgf.m, 7.2 ~ 10.8 lb-ft)
(2)
Remove the cable (B) from the bracket (A).
8.
Remove the shift cable by pulling it toward the interior.
    Shift Cable. Components
    1. Shift lever knob & boots aseembly 2. Shift lever assembly 3. Shift cable assembly 4. Shift cable retainer 5. Shift cable brakcet 6. Manual control lever ...

    Shift Cable. Installation
    1. Install in the reverse order of removal.    • ...

    See also:

    Engine Control Module (ECM). Schematic Diagrams
    ECM Terminal And Input/Output signal [M/T] ECM Terminal Function (M/T) Connector [C100-MA] Pin No. Description Connected to 1 Inject ...

    35R Clutch Control Solenoid Valve(35R/C_VFS). Specifications
    Direct control VFS[35R/C] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42) Current value(mA) ...

    Fuel Pressure Control Valve. Specifications
    Specification Item Specification Coil Resistance (Ω) 0.47 ~ 0.51 [20°C(68°F) ...