Kia Soul: Seat Belt Buckle Switch (BS). Installation - SRSCM - RestraintKia Soul: Seat Belt Buckle Switch (BS). Installation

Kia Soul 2014-2019 PS Service Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS). Installation

  
Be sure to install the harness wires not to be pinched or interfered with other parts.
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the ignition key from the vehicle.
3.
Install the seat belt buckle switch.
Tightening Torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
4.
Install the front seat assembly.
(Refer to the Body - "Seat")
5.
Reconnect the battery negative cable.
6.
After installing the Seat Belt Buckle Switch, confirm proper system operation:
A.
Turn the ignition switch ON, the SRS indicator should be turned on for about six seconds and then go off.
    Seat Belt Buckle Switch (BS). Removal
    1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front passenger seat as ...

    Occupant Detection System (ODS). Description
    In order to make normal activation of airbag system, SRSCM detects DTC(s) for the Passenger side Body Detection System. If the seat is occupied, Body sensor detects how measuring electrostati ...

    See also:

    How does the air bag system operate
    Air bags are activated (able to inflate if necessary) only when the ignition switch is turned to the ON or START position. The appropriate air bags inflate instantly in the event of a serious ...

    TJ Joint Inspection
    1. Check the spider assembly for roller rotation, wear or corrosion. 2. Check the groove inside the joint case for wear or corrosion ...

    Notes on the safe use of the Tire Mobility Kit
    Park your car at the side of the road so that you can work with the Tire Mobility Kit away from moving traffic. To be sure your vehicle will not move, even when you're on fairly level g ...