Kia Soul: Removal - BCM (Body Control Module) - Body Electrical SystemKia Soul: Removal

Kia Soul 2014-2019 PS Service Manual / Body Electrical System / BCM (Body Control Module) / Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the audio/ AVN head unit assembly.
(Refer to Body Electrical System - "Audio Unit")
(Refer to Body Electrical System - "AVN Head Unit")
3.
Remove the glove box housing assembly.
(Refer to Body - "Glove Box Housing")
4.
Separate the wiring fixed clip (A) on the BCM bracket.
5.
Loosen the mounting nuts from the BCM unit.
6.
Disconnect the connectors from the BCM (in the order as below)

(1)
Disconnect the connectors (A) from the direction of removing the Audio/ AVN head unit.
(2)
Disconnect the connectors (A) from the direction of removing the glove box housing.
    Circuit Diagram
    ...

    Installation
    1. Connect the connectors and install the BCM. 2. Install the glove box housing and audio/AVN head unit. ...

    See also:

    Special Service Tools
    Tool Name / Number Illustration Description Piston expander 09581-11000 Used for compressing front / rear disc brake caliper piston ...

    Transaxle Oil Temperature Sensor. Installation
    1. Install in the reverse order of removal.    • ...

    Prompt Feedback
    This feature is used to change voice command feedback between Normal and Expert modes. Select [Prompt Feedback] Set through TUNE knob On : This mode is for beginner users and provides d ...