Kia Soul: Removal - Clutch Release Cylinder - Clutch SystemKia Soul: Removal

Kia Soul 2014-2019 PS Service Manual / Clutch System / Clutch Release Cylinder / Removal

1.
Drain the brake fluid through the bleed plug (A).
  
•
Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.

2.
Remove the clutch release cylinder assembly (C) after removing the tube (B) and bolts (A-2ea).
Tightening torque:
14.7 ~ 21.6 N.m (1.5 ~ 2.2 kgf.m,10.8 ~ 15.9 lb-ft)

    Inspection
    1. Check the clutch release cylinder for fluid leakage. 2. Check the clutch release cylinder boot for damage. ...

    Installation
    1. Install in the reverse order of removal.    Apply the specified grease to ...

    See also:

    Maintenance services
    You should exercise the utmost care to prevent damage to your vehicle and injury to yourself whenever performing any maintenance or inspection procedures. Should you have any doubts concerning the ...

    Instrument Cluster Installation
    1. Connect the cluster connector. 2. Install the cluster assembly. 3. Install the clu ...

    Automatic reversal
    If an object is detected while the sunroof is closing automatically, it will reverse the direction, and then stop. The auto reverse function does not work if a small obstacle is between the slidi ...