Kia Soul: Rear Seat Cushion Cover Replacement - Rear Seat - Body (Interior and Exterior)Kia Soul: Rear Seat Cushion Cover Replacement

Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Rear Seat / Rear Seat Cushion Cover Replacement

  
•
Put on gloves to protect your hands.
  
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
2.
Loosen the heater ECU unit mounting screws (A).
3.
Disconnect the heater ECU unit connector (B) and then remove the mounting clips (C).
[LH]

[RH]
4.
After removing the hog-ring clips (A) on the rear of seat cushion and remove the rear seat cushion cover (B).
[Rear side]

[Front side]
5.
Install in the reverse order of removal.
  
•
To prevent wrinkles, make sure the material is stretched evenly over the cover (B) before securing the hog-ring clips (A).
•
Replace the hog-ring clips with new ones using special tool (C) (09880-4F000).

    Rear Seat Cushion Cover Component Location
    1. Rear seat cushion cover ...

    Rear Back Armrest Component Location
    1. Rear back armrest ...

    See also:

    Output Speed Sensor. Description
    The output speed sensor is a vital unit that measures the rate of rotation of the transaxle's turbine shaft and output shaft, and delivers the readings to the TCM. The sensor provides cri ...

    Additional safety precautions
    Never let passengers ride in the cargo area or on top of a foldeddown back seat. All occupants should sit upright, fully back in their seats with their seat belts on and their feet on the flo ...

    Crash Pad Center Panel Replacement
       • Put on gloves to protect your hands. ...