Kia Soul: Rear Disc Brake. Removal - Brake System - Brake SystemKia Soul: Rear Disc Brake. Removal

Kia Soul 2014-2019 PS Service Manual / Brake System / Brake System / Rear Disc Brake. Removal

Brake caliper assembly
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the hose eyebolt (A).
Tightening torque :
24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)

3.
Remove the parking brake cable (A), after removing the clip (B).

  
Parking brake lever in the car must be in fully loosened position.
4.
Loosen the guide rod bolt (B) and the remove the rear caliper body (A).
Tightening torque :
21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft)

5.
Remove the brake pads (B) and pad retainers (C) in the caliper carrier (A).
6.
Loosen the caliper mounting bolts (B) and then remove the caliper carrier (A).
Tightening torque :
63.7 ~ 73.5 N.m (6.5 ~ 7.5 kgf.m, 47.0 ~ 54.2 lb-ft)

Rear Wheel Brake disc
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Loosen the guide rod bolt (B) and the remove the rear caliper body (A).
Tightening torque :
21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft)

3.
Remove the brake pads (B) and pad retainers (C) in the caliper carrier (A).
4.
Loosen the caliper mounting bolts (B) and then remove the caliper carrier (A).
Tightening torque :
63.7 ~ 73.5 N.m (6.5 ~ 7.5 kgf.m, 47.0 ~ 54.2 lb-ft)

5.
Remove the rear brake disc by loosening the screws (A).
Tightening torque :
4.9 ~ 5.9 N.m (0.5 ~ 0.6 kgf.m, 3.6 ~ 4.3 lb-ft)

    Rear Disc Brake. Components
    1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Brake pad 6. Pad retainer ...

    Rear Disc Brake. Replacement
    Rear brake pads 1. Remove the front wheel & tire. 2. Loosen the guide rod bolt (B) and the remove the rear caliper body (A). ...

    See also:

    Inspection
    Clutch cover assembly 1. Check the diaphragm spring end for wear and uneven height. 2. Check the pressure plate surface for we ...

    Rheostat Inspection
    1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad ...

    Horn
    To sound the horn, press the horn symbols on your steering wheel. Check the horn regularly to be sure it operates properly. ✽ NOTICE To sound the horn, press the area indicated by the h ...