Kia Soul: Rear Combination Lamp
Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the rear combination lamp (A) after loosening the mounting
screws.
|
| 3. |
Disconnect the rear combination lamp connector (A).
|
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the rear combination lamp assembly.
|
| 3. |
Remove the turn signal lamp socket (A) by turning the socket
conuterclockwise.
|
| 4. |
Remove the turn signal lamp bulb (A).
|
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the rear combination lamp assembly.
|
| 3. |
Remove the back up lamp socket (A) by turning the socket conuterclockwise.
|
| 4. |
Remove the back up lamp bulb (A).
|
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the rear combination lamp assembly.
|
| 3. |
Remove the tail & side marker socket (A) by turning the socket
conuterclockwise.
[Top]
[Middle]
[Bottom]
|
| 4. |
Remove the tail & side marker lamp bulb (A).
[Top]
[Middle]
[Bottom]
|
Installation
| 1. |
Install the rear combination lamp assembly.
|
| 2. |
Connect the negative (-) battery terminal.
|
Luggage Lamp
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the luggage lamp (A).
...
See also:
Electrical equipment
The electrical system of your vehicle is designed to perform under all reasonably
expected operating conditions. However, before any additional electrical equipment
is installed in your vehicle, c ...
Snowy or icy conditions
To drive your vehicle in deep snow, it may be necessary to use snow tires or
to install tire chains on your tires.
If snow tires are needed, it is necessary to select tires equivalent in size
and ...
Wheel alignment and tire balance
The wheels on your vehicle were aligned and balanced carefully at the factory
to give you the longest tire life and best overall performance.
In most cases, you will not need to have your wheels al ...