Kia Soul: Rear Coil Spring Replacement - Rear Suspension System - Suspension SystemKia Soul: Rear Coil Spring Replacement

Kia Soul 2014-2019 PS Service Manual / Suspension System / Rear Suspension System / Rear Coil Spring Replacement

1.
Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub.
Tightening torque :
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)

  
•
Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).
3.
Loosen the bolt and then remove the rear shock absorber (A) from the torsion beam axle.
Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

4.
Pull the torsion beam axle in the direction of a down and then remove the coil spring (A).
5.
Installation is the reverse of removal.
    Rear Coil Spring Components
    1. Spring lower pad 2. Spring 3. Spring upper pad ...

    Rear Coil Spring Inspection
    1. Check the coil spring for crack and deformation. 2. Check the coil spring pad for damage and deformation. ...

    See also:

    Steering Column and Shaft. Disassembly
    Key lock assembly 1. Make a groove on the head of special bolts (A) by a punch. 2. Loosen the special bolt using a screw driver and ...

    Warning lights
    ✽ NOTICE - Warning lights Make sure that all warning lights are OFF after starting the engine. If any light is still ON, this indicates a situation that needs attention. Air bag Warning Lig ...

    Brake Booster Operating Test
    For simple checking of the brake booster operation, carry out the following tests. 1. Run the engine for one or two minutes, and then stop it. If the pedal depresses ...