Kia Soul: Radiator Inspection
Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Cooling System / Radiator Inspection
Radiator Cap Testing
1. |
Remove the radiator cap, wet its seal with engine coolant, and
then install it on a pressure tester.
|
2. |
Apply a pressure of 93.16 ~ 122.58 kPa (0.95 ~ 1.25 kgf/cm², 13.51
~ 17.78 psi).
|
3. |
Check for a drop in pressure.
|
4. |
If the pressure drops, replace the cap.
|
Radiator Leakage Test
1. |
Wait until engine is cool, then carefully remove the radiator
cap and fill the radiator with engine coolant, then install it on the
pressure tester.
|
2. |
Apply a pressure tester to the radiator and apply a pressure of
93.16 ~ 122.58kpa (0.95 ~ 1.25kg/cm², 13.51 ~ 17.78psi).
|
3. |
Inspect for engine coolant leaks and a drop in pressure.
|
4. |
Remove the tester and reinstall the radiator cap.
|
Radiator Components
1. Radiator upper bracket (RH) 2. Radiator upper bracket (LH) 3. Mounting insulator 4. Radiator upper hose 5. Filler neck 6. Radiator l ...Radiator Removal and Installation
1. Disconnect the battery negative terminal. 2. Remove the air duct (A). 3. Separate the filler neck (A ...See also:
Windshield wipers
Operates as follows when the ignition switch is turned ON.
MIST :
For a single wiping cycle, push the lever upward and release it with the lever in the OFF position. The wipers will operate cont ...
MENU : My Music Mode
In My Music mode, press the
key to set the Repeat, Random, Information, Delete, Delete All, and Delete Selection
features.
...
Knock Sensor (KS). Knock Sensor (KS).
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Remove the engine room under cover.
(Re ...