Kia Soul: Parking Brake Lever. Installation - Parking Brake System - Brake SystemKia Soul: Parking Brake Lever. Installation

Kia Soul 2014-2019 PS Service Manual / Brake System / Parking Brake System / Parking Brake Lever. Installation

1.
Install the parking brake lever assembly (A).
Tightening torque :
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)

2.
Install the parking brake cable (B).
3.
Apply a coating of the specified grease to each sliding parts (A) of the ratchet plate or the ratchet pawl.
Specified grease:
Multi purpose grease SAE J310, NLGI No.2

4.
Install the parking brake cable adjuster, then adjust the parking brake lever stroke by turning adjusting nut (A).
Parking brake lever stroke:
5 ~ 7 clicks (Pull the lever with 196N (20 kgf, 44 lbf))

5.
Release the parking brake lever fully, and check that parking brakes do not drag when the rear wheels are turned. Readjust if necessary.
6.
Make sure that the parking brakes are fully applied when the parking brake lever is pulled up fully.
7.
Reconnect the connector (A) of parking brake switch.

  
Inspect the continuity of parking brake switch.
When the brake lever is pulled: continuity
When the brake lever is released: no continuity
8.
Install the floor console.
(Refer to Body - "Floor console")
    Parking Brake Lever. Removal
       The parking brake cables must not be bent or distorted. This will lead to stiff operation and premature failure. ...

    Parking Brake Lever. Adjustment
    Parking Brake Lever Stroke Adjustment 1. Remove the rear console cover (A). 1. Apply the brake pedal 20 times with the force of 10kgf af ...

    See also:

    Multimedia Jack Description
    The multimedia jack on the console upper cover is for customers who like to listen to external portable music players like the MP3, iPod and etc., through the vehicle's sound system wh ...

    CVVT Oil Control Valve (OCV). Description and Operation
    Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated ...

    Evaporator Temperature Sensor Description
    The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling ...