Kia Soul: Parking Brake Cable. Removal
The parking brake cables must not be bent or distorted. This will
lead to stiff operation and premature failure.
|
1. |
Release the parking brake lever and parking brake cable is loose.
|
2. |
Remove the rear console cover (A).
|
3. |
Loosen the adjusting nut (A) and the parking brake cables (B).
|
4. |
Raise the vehicle, and make sure it is securely supported.
|
5. |
Remove the rear tire and wheel.
|
6. |
Remove the parking brake cable (A), after removing the clip (B).
|
7. |
Loosen the parking brake cable bracket bolts and remove the parking
brake cable (A).
|
Parking Brake Lever. Adjustment
Parking Brake Lever Stroke Adjustment 1. Remove the rear console cover (A). 1. Apply the brake pedal 20 times with the force of 10kgf af ...Parking Brake Cable. Installation
1. Install the parking brake cable (A). Tightening torque : 19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft) ...See also:
Rear Hub - Carrier Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear wheel and tire (A) from ...
Input Speed Sensor. Installation
1.
Install in the reverse order of removal.
•
...
Occupant Detection System (ODS). Installation
1.
Install in the reverse order of removal.
2.
Reconnect the battery negative cable.
3.
After installing the OD ...