•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Take care not to scratch the body surface.
|
|
1. |
Using a screwdriver or remover, remove the front door quadrant
inner cover (A).
|
2. |
Loosen the outside rear view mirror mounting screw (A).
|
3. |
After loosening the mounting bolts, then remove the outside rear
view mirror (A).
|
4. |
Disconnect the outside rear view mirror connector (B).
Tightening torque :
6.9~10.8 N.m(0.7~1.1 kgf.m, 5.1~8.0 lb-ft)
|
|
5. |
Install in the reverse order of removal.
• |
Make sure the connector is connected properly.
|
• |
Replace any damaged clips.
|
|
|
1. Outside rear view mirror
...
1. Inside rear view mirror
...
See also:
Manual transaxle shift indicator
Type A
Type B
This indicator informs you which gear is desired while driving to save fuel.
For example
: Indicates that shifting up to the
3rd gear is desired (currently the shift lever is i ...
Fuel Pressure Control Valve. Repair procedures
Inspection
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the fuel pressure regulator valve ...
Removing and storing the spare tire (if equipped)
Turn the tire hold-down wing bolt counterclockwise.
Store the tire in the reverse order of removal.
To prevent the spare tire and tools from “rattling” while the vehicle is in motion,
stor ...