Kia Soul: Oil Pressure Switch Removal and Installation
Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Lubrication System / Oil Pressure Switch Removal and Installation
| 1. |
Remove the under cover.
|
| 2. |
Remove the oil drain plug, and drain the oil into a container.
|
| 3. |
Remove the oil pressure switch(A).
|
| 4. |
Install in the reverse order of removal
|
When installing the oil pressure switch, apply seal lock to the
thread.
|
Oil Pump Removal and Installation
1.
Remove the timing chain cover.
(Refer to Timing System - "Timing Chain Cover")
2.
Remove the pump cover (A).
...
Oil Pressure Switch
1.
Check the continuity between the terminal and the body with an
ohmmeter.
If there is no continuity, replace the oil pressure switch.
...
See also:
Unlocking
Using the door handle
1.Press the button of the driver's outside door handle.
2.The driver’s door will unlock. The hazard warning lights will blink and the chime
will sound two times.
3.Pre ...
Components
1. Clutch pedal assembly
2. Ignition lock and clutch switch
3. Master cylinder
4. Clutch tube
5. Clutch release cylinder
...
Front Impact Sensor (FIS). Description
The Front Impact Sensor (FIS) is installed in the Front End Module (FEM).
They are remote sensors that detect acceleration due to a collision at its mounting
location. The primary purpose of ...