Kia Soul: Manual heating and air conditioning
The heating and cooling system can be controlled manually by pushing buttons other than the AUTO button. In this case, the system works sequentially according to the order of buttons selected.
When pressing any button (or turning any knob) except AUTO button while automatic operation, the functions not selected will be controlled automatically.
1. Start the engine.
2. Set the mode to the desired position.
3. Set the temperature control to the desired position.
4. Set the air intake control to the outside (fresh) air position.
5. Set the fan speed control to the desired speed.
6. If air conditioning is desired, turn the air conditioning system on.
Press the AUTO button in order to convert to full automatic control of the system.
- Mode selection
- Temperature control
- Air intake control
- Fan speed control
- Air conditioning
- Blower OFF
- Climate information screen selection
Automatic heating and air conditioning
1. Push the AUTO button. It is indicated by AUTO on the display. The modes, fan
speeds, air intake and air-conditioning will be controlled automatically by temperature
setting.
2.Set the temp ...
Mode selection
The mode selection button controls the direction of the air flow through the
ventilation system.
Refer to the illustration in the “Manual climate control system”.
The air flow outlet port is ...
See also:
EBD(Electronic Brake-force Distribution)
The EBD system (Electronic Brake force Distribution) as a sub-system of
the ABS system is to control the effective adhesion utilization by the rear
wheels.
It further utilizes the efficie ...
Main Crash Pad Assembly Replacement
•
Put on gloves to protect your hands.
...
Disc brakes and pads Inspection
Check the pads for excessive wear, discs for run out and wear, and calipers
for fluid leakage.
Front Brake
Front Brake Disc Thickness Check
1.
Check the ...