Kia Soul: Luggage Side Trim Replacement - Interior Trim - Body (Interior and Exterior)Kia Soul: Luggage Side Trim Replacement

Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Interior Trim / Luggage Side Trim Replacement

  
•
Put on gloves to protect your hands.
  
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
2.
Remove the rear seat back assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
3.
Remove the rear door scuff trim.
(Refer to Interior Trim - "Door Scuff Trim")
4.
Remove the rear transverse trim.
(Refer to Interior Trim - "Rear Transverse Trim")
5.
After loosening the mounting bolts, then remove the rear seat lower side bracket (A) [LH,RH].
6.
Slighty remove the rear door body side weatherstrip.
7.
Slighty remove the tail gate weatherstrip.
8.
After loosening the mounting bolt, then remove the rear seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

9.
After loosening the mounting screws, then remove the luggage side trim (A).
10.
Install in the reverse order of removal.
  
•
Make sure the connector are connected in properly.
•
Replace any damaged clips.
    Luggage Side Trim Component Location
    1. Luggage side trim ...

    Rear Pillar Trim Component Location
    1. Rear pillar trim ...

    See also:

    Fuel tank air filter Replacement
    1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Lift the vehicle. 3. ...

    Auto Head Lamp Leveling Unit Description
    According to driving environment and loading state of vehicle, head lamp lighting direction is changed to keep the driver's visibility range and to protect the driver's vision from ...

    Air cleaner filter Inspection
    1. Remove the air filter. 2. Visually check that the air filter is not excessively damaged or oily. If necessary, replace the air filter. ...