Inspection
|
1. |
Turn the ignition switch OFF.
|
|
2. |
Disconnect the IATS connector.
|
|
3. |
Measure resistance between the IATS terminals 3 and 4.
|
|
4. |
Check that the resistance is within the specification.
Specification:
Refer to “Specification”
|
|
Removal
|
1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
|
2. |
Disconnect the intake air temperature sensor connector (A).
|
|
3. |
Remove the installation bolt (B), and then remove the sensor from
the surge tank.
|
Installation
| •
|
Install the component with the specified torques.
|
| •
|
Note that internal damage may occur when the component
is dropped. If the component has been dropped, inspect before
installing.
|
|
| •
|
Insert the sensor in the installation hole and be careful
not to damage.
|
|
|
1. |
Install in the reverse order of removal.
Intake air temperature sensor
mounting bolt:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
|
|
Circuit Diagram
(M/T)
(A/T)
...
Description
Engine Coolant Temperature Sensor (ECTS) is located in the engine coolant
passage of the cylinder head for detecting the engine coolant temperature. The
ECTS uses a thermistor th ...
See also:
Input Speed Sensor. Description
Input speed sensor is a vital unit that measures the rate of rotation
of the input shaft inside the transaxle and delivers the readings to the Transaxle
Control Module(TCM). The sensor provid ...
Voice Recognition and Phone Contact Tips:
The Kia Voice Recognition System may have difficulty understanding some accents
or uncommon names. When using Voice Recognition to place a call, speak in a moderate
tone, with clear pronunciation ...
Battery Components
1. Battery insulation pad
2. Battery
3. Battery tray
4. Battery mounting bracket
...
Kia Soul: Intake Air Temperature Sensor (IATS). Repair procedures
Intake Air Temperature Sensor (IATS). Schematic Diagrams
Engine Coolant Temperature Sensor (ECTS). Description and Operation