Kia Soul: Installation
If reinstalling used cover, the cover should be installed with
its clutch disc as a set.
|
1. |
Apply grease on a disc spline part and transaxle input shaft spline
part as required.
|
2. |
Install the clutch disc and the cover with SST (A: 09411-1P000).
|
3. |
Install the clutch cover bolts. Not to be bent or twisted, Tighten
them in diagonal directions.
[Gasoline 1.6]
[Gasoline 2.0]
|
4. |
Install the transaxle assembly.
G 1.6 GDI (Refer to Manual Transaxle System - " Manual Transaxle")
G 2.0 GDI (Refer to Manual Transaxle System - " Manual Transaxle")
|
Inspection
Clutch cover assembly 1. Check the diaphragm spring end for wear and uneven height. 2. Check the pressure plate surface for we ...See also:
Brake Booster. Components
1. Brake booster
2. Master cylinder assembly
3. O-ring
...
Components Location
1. Automatic transaxle
2. Inhibitor switch
3. Transaxle Control Module (TCM)
4. Valve body cover
5. Solenoid valve connect
6. Oil temperature sensor
7. Valve body assembly ...
Maintenance under severe usage conditions
The following items must be serviced more frequently on cars normally used under severe driving conditions. Refer to the chart below for the appropriate maintenance intervals. R : Replace
I : Inspe ...