Kia Soul: Inspection (With GDS)
Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Multifunction Switch / Inspection (With GDS)
1. |
Check IPM input/output specification of multifunction switch
using the GDS. If the specification is abnormal, replace the lamp
or wiper switch.
|
2. |
If diagnosis is required on the multifunction switch, select
model and "IPM".
|
3. |
Select "Current data" and check the input/output condition
of "Multifunction switch".
|
4. |
To perform test on "Multifunction switch" outputs, select
"Actuation test".
|
Inspection
Lighting Switch Inspection 1. With the multi function switch in each position, make sure that continuity exists between the terminals below. If conti ...Panorama Sunroof
...See also:
Circuit Diagram
Connector Pin Information
No.
Wire harness connector
Panorama motor
Blind motor
...
Cigarette lighter
For the cigarette lighter to work, the ignition switch must be in the ACC or
ON position.
To use the cigarette lighter, push it all the way into its socket. When the element
is heated, the ligh ...
Fuel Additives
Kia recommends that you use good quality gasolines treated with detergent additives
such as TOP TIER Detergent Gasoline, which helps prevent deposit formation in the
engine. These gasolines will h ...