Kia Soul: Inspection
Front Door Lock Module Inspection
1. |
Remove the front door trim.
(Refer to Body - "Front Door Trim")
|
2. |
Remove the front door module.
(Refer to Body - "Front Door Module")
|
3. |
Disconnect the connectors from the actuator.
|
4. |
Check actuator operation by connecting power and ground according
to the table. To prevent damage to the actuator, apply battery voltage
only momentarily.
|
5. |
Check for continuity between the terminals in each switch
position according to the table.
|
Rear Door Lock Module Inspection
1. |
Remove the rear door trim.
(Refer to Body - "Rear Door Trim")
|
2. |
Remove the rear door module.
(Refer to Body - "Rear Door Module")
|
3. |
Disconnect the connectors from the actuator.
|
4. |
Check actuator operation by connecting power and ground according
to the table. To prevent damage to the actuator, apply battery voltage
only momentarily.
|
5. |
Check for continuity between the terminals in each switch
position according to the table.
|
Tailgate Lock Module Inspection
1. |
Remove the tailgate trim.
(Refer to Body - "Tailgate Trim")
|
2. |
Disconnect the 4P connector from the actuator.
|
3. |
Check actuator operation by connecting power and ground according
to the table. To prevent damage to the actuator, apply battery voltage
only momentarily.
|
Tailgate Open Switch
1. |
Remove the tailgate trim.
(Refer to Body - "Tailgate Trim")
|
2. |
Disconnect the connector from the actuator.
|
3. |
Check for continuity between the terminals in each switch
position according to the table.
|
Hood Switch
1. |
Disconnect the connector (A) and bolts from the hood switch.
|
2. |
Check for continuity between the terminals and ground according
to the table.
|
Component Location
1. Hood switch 2. BCM & RF receiver 3. Key warning switch 4. Front door lock actuator & switch 5. Rear door lock actuator & switch 6. Tailgate ...Transmitter Inspection
1. Check that the red light flickers when the door lock or unlock button is pressed on the transmitter. 2. Remove the batt ...See also:
Battery Adjustment
Battery Charging
In general, vehicle battery charging system has three forms.
1.
Constant current charge: The battery voltage gradually rises by
charging with setti ...
ENGINE START/STOP button position
OFF
Not illuminated
• With manual transaxle
To turn off the engine, stop the vehicle then press the ENGINE START/STOP button
with the ENGINE START/STOP button ON.
• With automatic transaxl ...
Components
...