Kia Soul: Inspection
| 1. |
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
|
| 2. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
|
| 3. |
Disconnect the back up lamp switch connector (A).
|
| 4. |
Check the continuity between no. 1 and 2 terminals of backup lamp
switch. When the shift lever is in reverse, there should be continuity.
|
Specification
Item
Specification
Current voltage
13V
Working voltage
DC 10~15V
Operating force
3.0kg Max
Volta ...
Replacement
1.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
2.
Remove the battery and battery tray ...
See also:
Room Lamp Installation
Room Lamp
1.
Install the room lamp assembly after connecting the lamp connector.
2.
Install the lens after assembling the ...
Language
This menu is used to set the display and voice recognition language.
Select [Language]
Set through
TUNE knob
❈ The system will reboot after the language is changed.
❈ Langu ...
G-Sensor Calibration
1.
Ignition "OFF", connect GDS.
2.
Ignition "ON" & Engine "OFF" select vehicle name and ESC system.
...